PHARMA CAST FILM LINE 50MM, GMP COMPLIANT
The GMP compliant CFL 50 is based on Xplore’s proprietary technology. In combination with our PME 5 micro extruder, it is now possible to obtain reproducible cast film with just 5 g of excipient and API in 5 - 10 minutes. In this way your formulation development time is drastically reduced and considerably less R&D budget is needed.
PHARMA CAST FILM LINE 50MM
Key features
Our continuous feed kit, consisting of a mountable barrel hopper and continuous feed screws, makes it possible to process larger samples into extremely long film via continuous extrusion.
The pharma film line 50 mm* is able to produce cast film and sheet with 5 – 10 g samples. The integrated air knife can process film up to a width of ca. 50 mm.
The film drawing speed is between 100 and 5000 mm/min and the drawing drum can be adjusted with increments of 1 mm/min.* The second, winding drum is torque controlled (its diameter will grow during the test run), and the winding torque can be adjusted with increments of 1 Nmm.
In combination with our micro compounder, which is equipped with throughput control, you can produce a uniform film thickness without the use of a gear pump.
Latest results show that films as thin as 5 µm can be obtained without holes.
